Cold chain monitoring

Know the cooler is in trouble before the product is.

A sensor on each cooler, freezer, or reefer. A text and an email when temperature, humidity, or a door leaves the limit. If nobody answers, the next person is added. If it needs a repair, a case goes to an HVAC or reefer vendor.

The price is confirmed before you are charged.

The expensive hour is the one nobody is there to see.

A clipboard at the start of the shift tells you what the cooler was doing then. It does not call you at 2 a.m.

It climbs after close

A failed compressor or a warm load sits until morning. By open, the product is soft and the loss is already on the shelf.

A door stays open

A delivery ends and the door does not. The unit runs, the temperature rises, and the first person to notice is the morning cook.

The inspector asks for the log

Min and max, gaps, and what you did about an excursion need to be on a report, not reconstructed from memory.

How a site gets watched

Hardware on the unit. Limits you set. People you already trust, in the order you choose.

  1. 1

    Put a sensor on the unit

    Temperature, humidity, and door, on the cooler or freezer. A gateway at the site carries the readings in. A tracker on a reefer can report where it is.

  2. 2

    Set the limit for that unit

    Each cooler can have its own range. A defrost or a delivery can wait 5, 10, or 15 minutes, so a short spike is recorded and does not wake anyone. A real drift does.

  3. 3

    Reach a person, then the next

    The first contact gets a text and an email with the reading. They can acknowledge from the text. If nobody does, the next contact is added. You can also be told when the temperature comes back.

  4. 4

    Open a repair when watching is not enough

    A case records power, the door, and what the unit needs. Eligible HVAC or reefer vendors are offered the job. You keep the notes for the report.

What you use after the account is open

The same screens your team uses on a live site. Nothing here is a sample customer or a promised result.

Every unit, one list

Coolers, freezers, and reefers by location, with the last reading, battery, and whether the sensor is still reporting.

Alerts with a next step

The reading, how long it has been out, who was told, and an acknowledgment. Door and offline alerts close when the condition clears.

A case, then a vendor

Guided triage, then an offer to vendors who cover the trade and the area. You see who has the job and what they wrote when they finished.

A log you can hand over

A health calendar by day, and a PDF or CSV for a location and a date range. HACCP, FDA, CDC storage, and USDA sections are for review against your plan. They are not a certification.

More than one site

Locations on one dashboard. A reefer with a tracker shows on the fleet map, with an alert if it moves outside its area or stops reporting.

The people who should know

Contacts per unit, location, or account. Teammates get their own logins. You choose who is first when something is wrong.

A monthly subscription for the monitoring.

Each plan is the monthly service for a site that uses a Milesight UG65 gateway, a TS302 temperature sensor, and a WS301 door sensor. Fleet also covers an EM500-PT100 probe and a MOKO AT001 tracker on a reefer. The price is a sandbox amount, collected at signup and stored as the monthly fee. It is not a live charge.

Watch

$99.00 / month

One site. Temperature, humidity, and door alerts by text and email.

  • Milesight UG65 Gateway
  • Milesight TS302 Temperature
  • Milesight WS301 Door
Start with Watch

When it needs a vendor

Respond

$149.00 / month

Watch, plus an emergency case and a vendor when a cooler needs a repair.

  • Milesight UG65 Gateway
  • Milesight TS302 Temperature
  • Milesight WS301 Door
Start with Respond

Fleet

$249.00 / month

More than one site on one dashboard, with compliance reports.

  • Milesight UG65 Gateway
  • Milesight TS302 Temperature
  • Milesight WS301 Door
  • Milesight EM500-PT100 Probe
  • MOKO AT001 GPS tracker
Start with Fleet

The devices on a site.

These are the units. A cooler gets a TS302 and a WS301. The site gets a UG65. A probe point gets an EM500-PT100. A reefer gets an AT001.

Gateway

Milesight UG65

One at each site. The sensors report to it, and it sends the readings in.

Temperature

Milesight TS302

On the cooler or freezer. This is the temperature sensor.

Door

Milesight WS301

On the cooler door. Reports open and closed.

Probe

Milesight EM500-PT100

A probe temperature sensor where the TS302 does not reach.

GPS tracker

MOKO AT001

On a reefer or trailer. Reports where it is over LTE.

More devices.

Another cooler or another site is a separate sandbox purchase. A probe and a tracker are the same hardware, ordered for that unit. Prices below are the ones in the catalog. Anything without a price is set before you are charged.

Add-on

Additional site

$49.00

Another location on the same account, with its own Milesight UG65 gateway.

Add-on

Sensor kit

$199.00

Another cooler: one Milesight TS302 temperature sensor and one Milesight WS301 door sensor.

Probe

Milesight EM500-PT100

Another probe sensor, for a case or a line the TS302 does not cover.

Tracker

MOKO AT001

Another GPS tracker, for a reefer or trailer that is not on the fleet plan yet.

What happens when you create the account

  1. Choose a package and enter the business, your name, and how many sites.
  2. Set a password, then the sandbox card. That email is the customer login. Card 4242 4242 4242 4242 completes the test payment. It is not a live charge.
  3. Add the site and the hardware. Guided setup walks through the gateway, the sensor, and the first reading.
  4. Set who gets the text. From then on, a drift reaches that person with the reading and what to do.

Before you sign up

Do I need hardware, or is this only software?

A site uses a Milesight UG65 gateway, a TS302 temperature sensor, and a WS301 door sensor. A probe point uses an EM500-PT100. A reefer uses a MOKO AT001 tracker. Another cooler is a sensor kit (another TS302 and WS301). Another location is an additional site, with its own UG65. Alerts still depend on that hardware and on its connection.

Will defrost or a delivery wake me up?

You can require the reading to stay out of range for 5, 10, or 15 minutes before anyone is notified. Shorter excursions are still recorded.

What if the first person does not answer?

The next contact on that unit, location, or account is added if nobody acknowledges in the escalation window. You can acknowledge from the text or from the alerts list.

Can I give this to a health inspector?

Yes, as a log. Pick the location and the dates and download a PDF or CSV. The health calendar shows each day. The report templates support a review against your operating plan. They are not a regulatory certification, and they do not promise that product was kept safe.

When am I charged?

The plan is a monthly subscription for the service and the devices on that plan: UG65, TS302, and WS301, and on Fleet also the EM500-PT100 and the AT001. Signup collects the sandbox amount once and stores it as the monthly fee. It is not a live charge. Another cooler is the sensor kit. Another site is the additional site. Test card 4242 4242 4242 4242 succeeds.

We have more than one kitchen or a reefer on the road.

Fleet is the subscription for more than one site. Each site has a UG65, and each cooler has a TS302 and a WS301. Reefers use a MOKO AT001. Probe points use an EM500-PT100. An additional site adds one more location and its own UG65.

Put a night watch on the cooler.

Create the account, pick a package, and the login is yours. Questions first? Contact the team or read about LogiCool.

Alerts and sensor data depend on hardware and connectivity. This platform does not guarantee prevention of spoilage or food-safety incidents.